-
DIESEL-ELECTRIC HYBRID ENERGY DC CHARGING GENSET (Off-grid energy,Diesel range extender)
It can be combined with new energy sources such as solar energy and wind energy. lt is especially suitable for battery energy storage. lt can be widely used in off-grid energy fields such as communication towers, range extander for electric vehicles, distributed energy sources, mobile charging piles, islands and border posts etc.
Advantages：
Many patents, latest fuel-electric hybrid technology;
Automatically adapt to the battery characteristics, DC electrical regulation with load;
Fast charging without damaging battery life;
Low energy consumption, low noise and long life;
Small size and light weight;
The best fit of the energy storage system;
-
DIGITAL FREQUENCY CONVERSION SILENT DIESEL GENERATOR
What is the diesel digital frequency conversion generator set?
1. definition
Diesel digital frequency generator set is a kind of power generation equipment that combines diesel engine and digital frequency generator set. It uses diesel as fuel, generates power through the combustion of diesel engines, drives the generator to generate electricity, and is equipped with digital frequency conversion technology.
Advantages:
Built-in permanent magnet generator design, ultra-small size and ultra-light weight
The speed changes with the load and automatically works at the lowest fuel consumption;
Low energy consumption, long service life and low noise;
Good quality of power generation,suitable for high-end appliances;
-
AIR-COOLED DIESEL ENGINE
Air-cooled diesel engine is mainly used in some scenarios with high requirements for mobility and environmental adaptability. In terms of agricultural machinery, such as small tractors used for field operations, its structure is simple, not afraid of the dust in the field environment. In construction, air-cooled diesel engine can be used for small generators to provide power for equipment in temporary places without water-cooled conditions. In some emergency rescue equipment, such as the mobile drainage pump, the air-cooled diesel engine can quickly start, to adapt to a variety of complex outdoor rescue environment.
Advantages of QC series diesel engines:
- New patent design
- Light weight, small size, better performance
- Double power based on same volume
- Low oil temperature, clean oil/gas separation, low oil consumption
- Energy saving and environmental protection, low fuel consumption, lowemission
- Excellent performance, high reliability
-
VERTICAL AIR-COOLED DIESEL ENGINE
Vertical shaft air-cooled diesel engine is widely used. In the agricultural field, it can be used for small irrigation equipment to accurately supply water to farmland, and its portability is easy to transfer between different plots. In the garden operation, drive the lawn mower, hedgerow pruning mer, etc., flexible shuttle in the landscape operation. In the construction of small power tools power supply, such as concrete vibrators, etc., in the temporary operation point or lack of water cooling conditions, vertical shaft air-cooled diesel engine with its unique structure and heat dissipation mode plays an important role.
Advantages：
1. Mature technology,stable quality
2. Standard connection sizes
3. Multiple starting way
4. Strong power,low vibration
-
light vertical shaft series diesel engine, oil-electric storage mixed energy station
The light vertical shaft series diesel engine and its oil-electric storage mixed energy station (range extender) developed by our company are in the leading domestic position and the international advanced position.
The output shaft of the vertical shaft engine is vertical downward (different from the ordinary engine output shaft is horizontal), directly connected to the drive wheel, saving the heavy and high cost transmission gear box, applied in small machinery and light machinery can significantly reduce weight, save energy, reduce cost, but also can simplify the operation. Diesel energy density is high, good safety, diesel vertical shaft engine than gasoline standing shaft engine torque, life can increase nearly doubled, energy consumption fell nearly half, no gasoline shortcomings such as flammable explosive, high safety, so with diesel vertical shaft engine instead of gasoline standing shaft engine is the inevitable trend of the engine industry in the future.
There is a big technical threshold to replace the gasoline engine with the diesel engine. The diesel engine has high compression ratio and high burst pressure, much greater than the gasoline engine; the high strength of the parts and the control of vibration, so the volume and weight of the diesel engine are larger than that of the gasoline engine; in addition, the horizontal movement of the vertical shaft diesel piston weight; these are the reasons why the diesel engine is not selected in light and small machinery. The light diesel engine of our company adopts new materials, new processes and finite element design, which solves the lightweight problem of small diesel engine, and controls the weight and volume of the diesel engine close to the gasoline engine, which is a revolutionary progress of diesel engine technology. On the basis of lightweight, the lubrication system is further designed and optimized to achieve the ideal oil thermal load control; the excessive vibration of diesel engine and the short fault-free running time are solved, thus overcoming the final barrier of diesel engine to replace the gasoline engine.
In order to meet the arrival of the era of artificial intelligence, the company will also in small vertical shaft diesel digital and intelligent continue to research, development of digital vertical shaft diesel will store in hybrid energy station and range extender large-scale application scenarios for energy saving, consumption reduction, mute and equipment long life, nearly zero emissions requirements, such as in the process of national technology innovation to make great contributions.
Vertical shaft diesel engine is mainly used in courtyard mower, mount type mower, rotary tiller, outboard machine, floor machine, unmanned garden machinery, unmanned plant protection machinery, small generator, small construction machinery, light field drilling rig, energy storage range extender machinery, replace single double cylinder air cooled vertical shaft gasoline machine, huge demand. At present, the main manufacturers of gasoline vertical shaft are: the United States, Kohler, Japan Honda, Kawasaki, China Zongshen, Lifan, Longxin, Shen, and nearly 100 Sichuan, Zhejiang, Jiangsu, Guangdong and other places of gasoline engine enterprises, and the domestic almost see mature and reliable vertical shaft diesel engine.
To sum up, light vertical shaft diesel engine is difficult to design, with high technical content, good product quality and wide application range. It is a high-tech high-end manufacturing product with high added value, with huge market and strong vitality. -
ULTRA SILENT GENERATOR SET
Ultra-low noise diesel generator set is a special power generation equipment. On the basis of the traditional diesel generator set, through a series of sound insulation and noise reduction measures, the noise generated in the operation process of the unit is greatly reduced. Generally speaking, the noise level of this kind of generator set can be controlled below 70 decibels, much lower than the ordinary diesel generator set.
Advantages of ultra silent generator set:
Light weight & small volume based on same power
Ultra-low noise design, operation quietly
Lowinner temperature, good reliability
Intelligent electro-mechanical compound speed regulation
Start/stop in subsection, idling without load,prolonging life, saving energy
-
OPEN FRAME DIESEL GENERATOR 4
Q: What is an open-frame diesel generator set?
A: Open frame diesel generator set is a common power generation equipment. It is mainly composed of diesel engine, generator, control screen and chassis. Compared with other types of generator sets, the main components such as the engine and generator are open-mounted on a simple frame (chassis) without a closed shell, which is also the origin of the “open frame” .
OPEN FRAME DIESEL GENERATOR
Advantages of open generator set:
Light weight & small volume based on same power
Double power based on same volume
Low fuel consumption, good economy
Excellent performance, high reliability
-
E7 Φ9.49-ID6-0° Male End Piece for plastic quick connectors PA 6.0×8.0
Item：E7 Φ9.49-ID6-0° Male End Piece for plastic quick connectors
Media: WATER, FUEL, UREA
Size: Φ9.49-ID6-0°
Hose fitted: PA 6.0×8.0 or 5/16〞
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q19 ID24-0° Electric Heating Joint for plastic quick connectors to adjust the flow
Item：Q19 ID24-0° Electric Heating Joint for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID24-0°
Hose fitted: Rubber Hose ID22-24
Material: PA12+30%GF
Working pressure : DC20-36V
Working voltage: 12V/24V
Ambient Temprature: -40°C to 150°C
-
E12 Φ11.80-ID10-0° Male End Piece for plastic quick connectors
Item：E12 Φ11.80-ID10-0° Male End Piece for plastic quick connectors
Media: /
Size: Φ11.80-ID10-0°
Hose fitted: PA 10.0×12.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E11 Φ9.89-ID8-0° Male End Piece for plastic quick connectors
Item：E11 Φ9.89-ID8-0° Male End Piece for plastic quick connectors
Media: /
Size: Φ9.49-ID8-0°
Hose fitted: PA 8.0×10.0 or 3/8〞
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E20 Φ7.89-ID6-90° Male End Piece for plastic quick connectors
Item：E20 Φ7.89-ID6-90° Male End Piece for plastic quick connectors
Media: /
Size: Φ7.89-ID6-90°
Hose fitted: PA 6.0×8.0 or 5/16〞
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E6 Φ7.89-ID8-0° Male End Piece for plastic quick connectors
Item：E6 Φ7.89-ID8-0° Male End Piece for plastic quick connectors
Media: /
Size: Φ7.89-ID8-0°
Hose fitted: PA 8.0×10.0 or 3/8〞
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E21 Φ9.49-ID6-ID8 -3 ways male end for plastic quick connectors
Item：E21 Φ9.49-ID6-ID8 -3 ways male end for plastic quick connectors
Media: Fuel/Water
Size: Φ9.49-ID6-ID8
Hose fitted:/
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q17 ID11-ID13-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q17 ID11-ID13-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID11-ID13-0°
Hose fitted: PA 11.0×13.0 to Rubber Hose ID13.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q11 ID13.5-ID15-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q11 ID13.5-ID15-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: D13.5-ID15-0°
Hose fitted: PA13.5×16.5 to Rubber Hose ID15
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q10 ID11-ID12-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q10 ID11-ID12-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID11-ID12-0°
Hose fitted: PA 11.0×13.0 to Rubber Hose ID12
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q8 ID8-ID7-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q8 ID8-ID7-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID8-ID7-0°
Hose fitted: PA 8.0×10.0 to Rubber Hose ID7.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q7 ID7-ID9-0° Adaptorfor plastic quick connectors to adjust the flow
Item：Q7 ID7-ID9-0° Adaptorfor plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID7-ID9-0°
Hose fitted: PA 6.0×8.0 to Rubber Hose ID9
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q16 ID11-ID17-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q16 ID11-ID17-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID11-ID17-0°
Hose fitted: PA 11.0×13.0 to Rubber Hose ID17.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q9 ID8-ID9.3-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q9 ID8-ID9.3-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID8-ID9.3-0°
Hose fitted: PA 8.0×10.0 to Rubber Hose ID9.3
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
Plastic adaptor for automobiles have many advantages. First, it is light, which helps reduce the weight of the vehicle and improve fuel economy. Secondly, the plastic material is corrosion-resistant and can work stably in a variety of harsh environments. Moreover, the cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly. If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.
-
Q3 ID6-ID6-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q3 ID6-ID6-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID6-ID6-0°
Hose fitted: PA 6.0×8.0 or 5/16〞
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
Plastic adaptor for automobiles have many advantages. First, it is light, which helps reduce the weight of the vehicle and improve fuel economy. Secondly, the plastic material is corrosion-resistant and can work stably in a variety of harsh environments. Moreover, the cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly. If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.
-
Plastic Male End Piece Nozzle Holder Φ7.89 for SAE VDA system
Item: ODM/OEM Plastic Male End Piece Nozzle Holder Φ7.89 for SAE VDA system
Size: Φ7.89
Hose fitted: Φ7.89
Material: PA12+30%GF
Working pressure : 5 to 7 bar
Temprature: -30°C to 120°C
-
W7 Wire Harness Protection Cover for automotive quick connector
Item：W7 Wire Harness Protection Cover for automotive quick connector
Suitable outer diameter of bellows : Φ10
-
W6 9.49-90° Protection Cover for automotive quick connector
Item：W6 9.49-90° Protection Cover for automotive quick connector
Size: 9.49-90°
Hose fitted: PA 6.0×8.0
Suitable outer diameter of bellows : Φ16
-
W5 9.49-0° Protection Cover for automotive quick connector
Item：W5 9.49-0° Protection Cover for automotive quick connector
Size: 9.49-0°
Hose fitted: PA 6.0×8.0
Suitable outer diameter of bellows : Φ16
-
W4 7.89-90° Protection Cover for automotive quick connector
Item：W4 7.89-90° Protection Cover for automotive quick connector
Size: 7.89-90°
Hose fitted: PA 6.0×8.0
Suitable outer diameter of bellows : Φ16
-
W3 7.89-0° Protection Cover for automotive quick connector
Item：W3 7.89-0° Protection Cover for automotive quick connector
Size: 7.89-0°
Hose fitted: PA 6.0×8.0
Suitable outer diameter of bellows : Φ16
-
W2 6.30-90° Protection Cover for automotive quick connector
Item：W2 6.30-90° Protection Cover with automotive quick connector
Size: 6.30-90°
Hose fitted: PA 3.0×5.0 or PA 6.0×8.0
Suitable outer diameter of bellows : Φ13, Φ16
-
W1 6.30-0° Protection Cover with automotive quick connector
Item：W1 6.30-0° Protection Cover with automotive quick connector
Size: 6.30-0°
Hose fitted: PA 3.0×5.0 or PA 6.0×8.0
Suitable outer diameter of bellows : Φ13, Φ16
-
O3 OD14-OD14-OD14 Three-tube clamp for automotive tubings and hoses combine fix
Item：O3 OD14-OD14-OD14 Three-tube clamp for automotive tubings and hoses combine fix
Size: The outer diameter of nylon tube: Φ14
Hose fitted: nylon tube: Φ14
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
O2 OD10-OD8-OD10 Three-tube clamp for automotive tubings and hoses combine fix
Item：O2 OD10-OD8-OD10 Three-tube clamp for automotive tubings and hoses combine fix
Size: The outer diameter of nylon tube: Φ10, Φ8, Φ10
Hose fitted: nylon tube: Φ10, Φ8, Φ10
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
O1 OD16-OD60 Pipe clamp for automotive tubings and hoses combine fix
Item：O1 OD16-OD60 Pipe clamp for automotive nylon tubings and rubber hoses combine fix
Size: The outside diameter of nylon tube/rubber tube : Φ16, Φ60
Hose fitted: nylon tube/rubber tube : Φ16, Φ60
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q27 ID19-ID19-90° Adaptor for plastic quick connectors to adjust the flow
Item：Q27 ID19-ID19-90° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID19-ID19-90°
Hose fitted: PA 14.0×16.5to PA 25.0×29.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q26 ID14-ID25-90° Adaptor for plastic quick connectors to adjust the flow
Item：Q26 ID14-ID25-90° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID14-ID25-90°
Hose fitted: PA 14.0×16.5to PA 25.0×29.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q22 Electric Heating Joint for plastic quick connectors to adjust the flow
Item：Q22 Electric Heating Joint for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: /
Hose fitted: /
Working pressure
C20-36VOperating voltage：12V/24V
Ambient Temprature: -40°C to 150°C
-
Q25 ID10-ID25-90°Adaptor for plastic quick connectors to adjust the flow
Item：Q25 ID10-ID25-90°Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID10-ID25-90°
Hose fitted: PA 10.0×12.0 to PA 25.0×29.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q24 ID6-ID13-90° Adaptor for plastic quick connectors to adjust the flow
Item：Q24 ID6-ID13-90° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID6-ID13-90°
Hose fitted: PA6.0×8.0 to Rubber Hose ID13
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q23 ID6-Φ9.1-90° Adaptor for plastic quick connectors to adjust the flow
Item：Q23 ID6-Φ9.1-90° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID6-Φ9.1-90°
Hose fitted: PA 8.0×8.0 to Φ9.1
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q15 ID6-ID7.3-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q15 ID6-ID7.3-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID6-ID7.3-0°
Hose fitted: PA 6.0×8.0 to Rubber Hose ID7.3
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
