-
V38W plastic quick connectors NW40-ID40-0° for VDA Cooling Water VDA QC
Item： V38 big size plastic quick connectors male end NW40-0° for VDA Cooling Water
Media: VDA Cooling Water
Size: NW40-0°
Material: PA66+30%GF
Operating Pressure: 0.5-5 bar
Ambient Temprature: -40°C to 120°C
Details: Plastic connectors used for vehicle connecting nylong tubings and NW40 quick connectors male end, easy to assemble and disconnect.
-
V36 big size plastic quick connectors female end NW40-0° for VDA Cooling Water
Item： V36 big size plastic quick connectors female end NW40-0° for VDA Cooling Water
Media: VDA Cooling Water
Size: NW40-0°
Material: PA66+30%GF
Operating Pressure: 0.5-5 bar
Ambient Temprature: -40°C to 120°C
Details: Plastic connectors used for vehicle connecting nylong tubings and NW40 quick connectors male end, easy to assemble and disconnect.
-
V37 big size plastic quick connectors female end NW40-90° for VDA Cooling Water
Item： V37 big size plastic quick connectors female end NW40-90° for VDA Cooling Water
Media: VDA Cooling Water
Size: NW40-0°
Material: PA66+30%GF
Operating Pressure: 0.5-5 bar
Ambient Temprature: -40°C to 120°C
Details: Plastic connectors used for vehicle connecting nylong tubings and NW40 quick connectors male end, easy to assemble and disconnect.
-
E2_1 plastic quick Connector male end for CQC Cooling Water adaptor
Item：E2_1 plastic quick Connector male end for CQC Cooling Water adaptor
Media: CQC Cooling Water
Size: Φ7.89-ID6-0°
Hose fitted: PA 6.0×8.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E7 Φ9.49-ID6-0° Male End Piece for plastic quick connectors PA 6.0×8.0
Item：E7 Φ9.49-ID6-0° Male End Piece for plastic quick connectors
Media: WATER, FUEL, UREA
Size: Φ9.49-ID6-0°
Hose fitted: PA 6.0×8.0 or 5/16〞
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q19 ID24-0° Electric Heating Joint for plastic quick connectors to adjust the flow
Item：Q19 ID24-0° Electric Heating Joint for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID24-0°
Hose fitted: Rubber Hose ID22-24
Material: PA12+30%GF
Working pressure : DC20-36V
Working voltage: 12V/24V
Ambient Temprature: -40°C to 150°C
-
E12 Φ11.80-ID10-0° Male End Piece for plastic quick connectors
Item：E12 Φ11.80-ID10-0° Male End Piece for plastic quick connectors
Media: /
Size: Φ11.80-ID10-0°
Hose fitted: PA 10.0×12.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E11 Φ9.89-ID8-0° Male End Piece for plastic quick connectors
Item：E11 Φ9.89-ID8-0° Male End Piece for plastic quick connectors
Media: /
Size: Φ9.49-ID8-0°
Hose fitted: PA 8.0×10.0 or 3/8〞
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E20 Φ7.89-ID6-90° Male End Piece for plastic quick connectors
Item：E20 Φ7.89-ID6-90° Male End Piece for plastic quick connectors
Media: /
Size: Φ7.89-ID6-90°
Hose fitted: PA 6.0×8.0 or 5/16〞
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E6 Φ7.89-ID8-0° Male End Piece for plastic quick connectors
Item：E6 Φ7.89-ID8-0° Male End Piece for plastic quick connectors
Media: /
Size: Φ7.89-ID8-0°
Hose fitted: PA 8.0×10.0 or 3/8〞
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E21 Φ9.49-ID6-ID8 -3 ways male end for plastic quick connectors
Item：E21 Φ9.49-ID6-ID8 -3 ways male end for plastic quick connectors
Media: Fuel/Water
Size: Φ9.49-ID6-ID8
Hose fitted:/
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q17 ID11-ID13-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q17 ID11-ID13-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID11-ID13-0°
Hose fitted: PA 11.0×13.0 to Rubber Hose ID13.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q11 ID13.5-ID15-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q11 ID13.5-ID15-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: D13.5-ID15-0°
Hose fitted: PA13.5×16.5 to Rubber Hose ID15
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q10 ID11-ID12-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q10 ID11-ID12-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID11-ID12-0°
Hose fitted: PA 11.0×13.0 to Rubber Hose ID12
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q8 ID8-ID7-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q8 ID8-ID7-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID8-ID7-0°
Hose fitted: PA 8.0×10.0 to Rubber Hose ID7.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q7 ID7-ID9-0° Adaptorfor plastic quick connectors to adjust the flow
Item：Q7 ID7-ID9-0° Adaptorfor plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID7-ID9-0°
Hose fitted: PA 6.0×8.0 to Rubber Hose ID9
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q16 ID11-ID17-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q16 ID11-ID17-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID11-ID17-0°
Hose fitted: PA 11.0×13.0 to Rubber Hose ID17.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q9 ID8-ID9.3-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q9 ID8-ID9.3-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID8-ID9.3-0°
Hose fitted: PA 8.0×10.0 to Rubber Hose ID9.3
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
Plastic adaptor for automobiles have many advantages. First, it is light, which helps reduce the weight of the vehicle and improve fuel economy. Secondly, the plastic material is corrosion-resistant and can work stably in a variety of harsh environments. Moreover, the cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly. If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.
-
Q3 ID6-ID6-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q3 ID6-ID6-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID6-ID6-0°
Hose fitted: PA 6.0×8.0 or 5/16〞
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
Plastic adaptor for automobiles have many advantages. First, it is light, which helps reduce the weight of the vehicle and improve fuel economy. Secondly, the plastic material is corrosion-resistant and can work stably in a variety of harsh environments. Moreover, the cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly. If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.
-
Plastic Male End Piece Nozzle Holder Φ7.89 for SAE VDA system
Item: ODM/OEM Plastic Male End Piece Nozzle Holder Φ7.89 for SAE VDA system
Size: Φ7.89
Hose fitted: Φ7.89
Material: PA12+30%GF
Working pressure : 5 to 7 bar
Temprature: -30°C to 120°C
-
Q27 ID19-ID19-90° Adaptor for plastic quick connectors to adjust the flow
Item：Q27 ID19-ID19-90° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID19-ID19-90°
Hose fitted: PA 14.0×16.5to PA 25.0×29.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q26 ID14-ID25-90° Adaptor for plastic quick connectors to adjust the flow
Item：Q26 ID14-ID25-90° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID14-ID25-90°
Hose fitted: PA 14.0×16.5to PA 25.0×29.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q22 Electric Heating Joint for plastic quick connectors to adjust the flow
Item：Q22 Electric Heating Joint for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: /
Hose fitted: /
Working pressure
C20-36VOperating voltage：12V/24V
Ambient Temprature: -40°C to 150°C
-
Q25 ID10-ID25-90°Adaptor for plastic quick connectors to adjust the flow
Item：Q25 ID10-ID25-90°Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID10-ID25-90°
Hose fitted: PA 10.0×12.0 to PA 25.0×29.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q24 ID6-ID13-90° Adaptor for plastic quick connectors to adjust the flow
Item：Q24 ID6-ID13-90° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID6-ID13-90°
Hose fitted: PA6.0×8.0 to Rubber Hose ID13
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q23 ID6-Φ9.1-90° Adaptor for plastic quick connectors to adjust the flow
Item：Q23 ID6-Φ9.1-90° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID6-Φ9.1-90°
Hose fitted: PA 8.0×8.0 to Φ9.1
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q15 ID6-ID7.3-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q15 ID6-ID7.3-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID6-ID7.3-0°
Hose fitted: PA 6.0×8.0 to Rubber Hose ID7.3
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q14 ID6-ID7.3-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q14 ID6-ID7.3-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID6-ID7.3-0°
Hose fitted: PA 6.0×8.0 to Rubber Hose ID7.3
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q12 ID14-ID20-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q12 ID14-ID20-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID14-ID20-0°
Hose fitted: PA 14.0×16.0 to Rubber Hose ID20.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q6 ID6-ID9.5-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q6 ID6-ID9.5-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID6-ID9.5-0°
Hose fitted: PA 6.0×8.0 to Rubber Hose ID9.5
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q5 ID6-ID7.5-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q5 ID6-ID7.5-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID6-ID7.5-0°
Hose fitted: PA 6.0×8.0 to Rubber Hose ID7.5
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q4 ID6-ID7.5-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q4 ID6-ID7.5-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID6-ID7.5-0°
Hose fitted: PA 6.0×8.0 to Rubber Hose ID7.5
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E31 Φ7.89–Nozzle Holder Rubber Hose male end for plastic quick connectors
Item：E31 Φ7.89–Nozzle Holder Rubber Hose male end for plastic quick connectors
Media: Fuel/Water
Size: Φ7.89–Nozzle Holder
Hose fitted: /
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Q2 ID6-ID5.3-0°Adaptor for plastic quick connectors to adjust the flow
Item：Q2 ID6-ID5.3-0°Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID6-ID5.3-0°Adaptor
Hose fitted: PA 6.0×8.0 to Rubber Hose ID5.3
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E30 Φ9.89-ID9.3-0° Rubber Hose male end for plastic quick connectors
Item：E30 Φ9.89-ID9.3-0° Rubber Hose male end for plastic quick connectors
Media: Fuel/Water
Size: Φ9.89-ID9.3-0°
Hose fitted: Rubber Hose ID9.3
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E29 Φ11.8-ID14-90° male end for plastic quick connectors
Item：E29 Φ11.8-ID14-90° male end for plastic quick connectors
Media: Fuel/Water
Size: Φ11.8-ID14-90°
Hose fitted: PA 14.0×16.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E24 Φ11.80-ID8-0° male end for plastic quick connectors
Item：E24 Φ11.80-ID8-0° male end for plastic quick connectors
Media: Fuel/Water
Size: Φ11.80-ID8-0°
Hose fitted: PA 8.0×10.0 or 3/8〞
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E25 Φ11.80-ID12-90 ° Rubber HOSEmale end for plastic quick connectors
Item：E25 Φ11.80-ID12-90 ° Rubber HOSEmale end for plastic quick connectors
Media: Fuel/Water
Size: Φ11.80-ID12-90 °
Hose fitted: Rubber Hose ID12.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E26 Φ18.90-15.82 male end for plastic quick connectors
Item：E26 Φ18.90-15.82 male end for plastic quick connectors
Media: Fuel/Water
Size: Φ18.90-15.82
Hose fitted: 18.9/15.82 end piece
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
E27 Φ11.80-ID10-0° male end for plastic quick connectors
Item：E27 Φ11.80-ID10-0° male end for plastic quick connectors
Media: Fuel/Water
Size: Φ11.80-ID10-0°
Hose fitted: PA 10.0×12.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
