-
V36 big size plastic quick connectors female end NW40-0° for VDA Cooling Water
Item： V36 big size plastic quick connectors female end NW40-0° for VDA Cooling Water
Media: VDA Cooling Water
Size: NW40-0°
Material: PA66+30%GF
Operating Pressure: 0.5-5 bar
Ambient Temprature: -40°C to 120°C
Details: Plastic connectors used for vehicle connecting nylong tubings and NW40 quick connectors male end, easy to assemble and disconnect.
-
V37 big size plastic quick connectors female end NW40-90° for VDA Cooling Water
Item： V37 big size plastic quick connectors female end NW40-90° for VDA Cooling Water
Media: VDA Cooling Water
Size: NW40-0°
Material: PA66+30%GF
Operating Pressure: 0.5-5 bar
Ambient Temprature: -40°C to 120°C
Details: Plastic connectors used for vehicle connecting nylong tubings and NW40 quick connectors male end, easy to assemble and disconnect.
-
V38 big size plastic quick connectors male end NW40-0° for VDA Cooling Water
Item： V38 big size plastic quick connectors male end NW40-0° for VDA Cooling Water
Media: VDA Cooling Water
Size: NW40-0°
Material: PA66+30%GF
Operating Pressure: 0.5-5 bar
Ambient Temprature: -40°C to 120°C
Details: Plastic connectors used for vehicle connecting nylong tubings and NW40 quick connectors male end, easy to assemble and disconnect.
-
K11 plastic quick connectors CQC18-ID14-0° for CQC Cooling Water adaptor
Item：K11 plastic quick connectors CQC18-ID14-0° for CQC Cooling Water adaptor
Media: CQC Cooling Water
Buttons: 2
Size: CQC18-ID14-0°
Hose fitted: PA 14.0×17.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
C2W Quick Connector Φ9.493/8〞-ID6-90° for water
Item: C2W Quick Connector Φ9.493/8〞-ID6-90° for water
Media: water
Buttons: 2
Size: Φ9.493/8〞-ID6-90°
Hose fitted: PA 6.0×8.0 or 5/16〞
Material: PA12+30%GF
Operating Pressure: 5 to 7 bar
Temprature: -30°C to 120°C
Plastic quick connector for automobiles have many advantages.
1. Light, which helps reduce the weight of the vehicle and improve fuel economy.
2.The plastic material is corrosion-resistant and can work stably in a variety of harsh environments.
3.The cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly.
If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.
-
V22W plastic quick connectors NW26-ID26-90° for VDA Cooling Water
Item： V22W plastic quick connectors NW26-ID26-90° for VDA Cooling Water
Media: VDA Cooling Water
Size: NW26-ID26-0°
Hose fitted: Rubber Hose ID26～ID30.0
Material: PA66+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
T54 ID14-ID14-ID6 Reducing T Shape Tee plastic for CQC Cooling Water adaptor
Item：T54 ID14-ID14-ID6 Reducing T Shape Tee plastic for CQC Cooling Water adaptor
Media: CQC Cooling Water
Size: ID14-ID14-ID6 Reducing T Shape Tee
Hose fitted: PA 14.0×16.0, PA 6.0×8.0
Material: PA66+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
K6 plastic quick connectors ID25-CQC14-90° for CQC Cooling Water adaptor
Item：K6 plastic quick connectors ID25-CQC14-90° for CQC Cooling Water adaptor
Media: CQC Cooling Water
Size: ID25-CQC14-90°
Hose fitted: PA 25.0×29.0,CQC14
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
K12 plastic quick connectors CQC18-ID14-90° for CQC Cooling Water adaptor
Item：K12 plastic quick connectors CQC18-ID14-90° for CQC Cooling Water adaptor
Media: CQC Cooling Water
Buttons: 2
Size: CQC18-ID14-90°
Hose fitted: PA 14.0×17.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
V41W plastic quick connectors NW12-ID14-90° for VDA Cooling Water
Item： V44W plastic quick connectors NW12-ID14-90° for VDA Cooling Water
Media: VDA Cooling Water
Size: NW12-ID14-90°
Hose fitted: PA 14.0×17.0
Material: PA12+30%GF
Operating Pressure: 0.5-5 bar
Ambient Temprature: -40°C to 120°C
Details: Plastic connectors used for vehicle connecting nylong tubings and NW12 quick connectors, easy to assemble and disconnect.
-
K3 plastic quick connectors ID25-CQC20-ID25 Reducing T Shape Tee for CQC Cooling Water adaptor
Item：K3 plastic quick connectors ID25-CQC20-ID25 Reducing T Shape Tee for CQC Cooling Water adaptor
Media: CQC Cooling Water
Buttons: 2
Size: ID25-CQC20-ID25 Reducing T Shape Tee
Hose fitted: PA 25.0×29.0,CQC20
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
V35W plastic quick connectors NW12-ID12-0° Adaptor for VDA Cooling Water VDA QC
Item： V35W plastic quick connectors NW12-ID12-0° Adaptor for VDA Cooling Water VDA QC
Media: VDA Cooling Water
Buttons: 2
Size: NW26-ID26-0°
Hose fitted: NW12 to Rubber Hose ID12～ID18.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
V19W plastic quick connectors NW26-ID25-0° for VDA Cooling Water
Item： V19W plastic quick connectors NW26-ID25-0° for VDA Cooling Water
Media: VDA Cooling Water
Buttons: 2
Size: NW26-ID25-0°
Hose fitted: PA 25.0×29.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
K9 plastic quick connectors CQC20-ID21-0° for CQC Cooling Water
Item：K9 plastic quick connectors CQC20-ID21-0° for CQC Cooling Water
Media: CQC Cooling Water
Size: CQC20-ID21-0°
Hose fitted: PA 21.0×24.0
Material: PA12+30%GF
Operating Pressure: 0.5-5 bar
Ambient Temprature: -40°C to 120°C
-
K8 plastic quick connectors CQC14-ID12-90° for CQC Cooling Water adaptor
Item：K8 plastic quick connectors CQC14-ID12-90° for CQC Cooling Water adaptor
Media: CQC Cooling Water
Buttons: 2
Size: CQC14-ID12-90°
Hose fitted: PA 12.0×14.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
Plastic quick connector(also called quick disconnect) for automobiles have many advantages. First, it is light, which helps reduce the weight of the vehicle and improve fuel economy. Secondly, the plastic material is corrosion-resistant and can work stably in a variety of harsh environments. Moreover, the cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly. If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.
-
V30W plastic quick connectors Adaptor NW26-ID25-0° for VDA Cooling Water
Item： V30W plastic quick connectors NW26-ID25-0° for VDA Cooling Water
Media: VDA Cooling Water
Size: NW26-ID25-0°
Hose fitted: NW26 to PA 25.0×29.0
Material: PA66+30%GF
Plastic adapter for automobile has many advantages, and the application scenario in automobile is very wide. In the automotive fuel system, Can be used to connect the tubing with different pipe diameter, Ensure the smooth delivery of the fuel oil, Prevent fuel oil leakage; In the cooling system, Can connect the coolant line, Ensure the normal circulation of the coolant between the engine and the radiator; In the braking system, Be available as a connector for pipe fittings, Enable the brake fluid to accurately transfer the pressure, Ensure the normal operation of the braking system; in addition, In the electrical systems of the cars, Plastic adapters can be connected to a variety of wires and harnesses, To realize the circuit conduction and signal transmission, For example, connect the connector of the vehicle charger to the interface of the car cigarette lighter, Charging the electronic devices; And in the installation of some car interior parts, Such as the connection of the air-conditioning and ventilation pipes, Plastic adapters also play an important role, It enables the pipes to be tightly connected, Ensure a smooth air flow, Provide a comfortable environment inside the car.
In the future, the plastic adapters used for automobiles will show the following development trends:
Lightweight: With the continuous improvement of the requirements for energy conservation and emission reduction in the automobile industry, lightweight has become an important development direction. The plastic adapter itself is light in weight, in line with this trend, and will be further optimized in material selection and structural design in the future to achieve more extreme lightweight, help reduce the weight of the vehicle, improve fuel efficiency or increase the range of electric vehicles.
High performance: the working environment of the car is complex and harsh, and the performance requirements of the adaptors are constantly improved. Future plastic adapters will have higher strength, better heat resistance, corrosion resistance and aging resistance, to adapt to various extreme conditions, to ensure the reliability and stability in the long-term use process. For example, new high-performance engineering plastics may be developed or modified to treat existing plastics to be used to greatly improve their performance.
Multi-function integration: In order to improve the integration and space utilization of automotive parts, plastic adapters may integrate more functions. For example, in addition to the connection function, it may also have sealing, shock absorption, noise reduction and other functions. Through the integrated design, reduce the number of parts, reduce the installation difficulty and cost, while improving the performance and quality of the vehicle.
Intelligence: With the development of automobile intelligence, plastic adapters may also incorporate intelligent elements. For example, with the sensor function, it can monitor the pressure, temperature, flow and other parameters in real time, and transmit data to the control system of the car, so as to find potential problems in time or realize accurate control and optimization of the relevant system.
Green environmental protection: in the background of increasing environmental awareness, the production and use of plastic adapters will pay more attention to environmental protection. On the one hand, in the selection of materials, it will tend to use recyclable and biodegradable environmental plastics to reduce the impact on the environment; on the other hand, in the production process, cleaner and energy-saving production processes to reduce energy consumption and pollutant emissions. -
K7 plastic quick connectors CQC14-ID12-0° for CQC Cooling Water adaptor
Item：K7 plastic quick connectors CQC14-ID12-0° for CQC Cooling Water adaptor
Media: CQC Cooling Water
Buttons: 2
Size: CQC14-ID12-0°
Hose fitted: PA 12.0×14.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
K5 plastic quick connectors ID25-CQC18-90° for CQC Cooling Water adaptor
Item：K5 plastic quick connectors ID25-CQC18-90° for CQC Cooling Water adaptor
Media: CQC Cooling Water
Buttons: 2
Size: ID25-CQC18-90°
Hose fitted: ID25-CQC18-90°
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
K4 plastic quick connectors ID25-CQC20-90° for CQC Cooling Water adaptor
Item：K4 plastic quick connectors ID25-CQC20-90° for CQC Cooling Water adaptor
Media: CQC Cooling Water
Buttons: 2
Size: ID25-CQC20-90°
Hose fitted: PA 25.0×29.0,CQC20
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
K2 plastic quick connectors CQC20-ID25-90° for CQC Cooling Water adaptor
Item：K2 plastic quick connectors CQC20-ID25-90° for CQC Cooling Water adaptor
Media: CQC Cooling Water
Buttons: 2
Size: CQC20-ID25-90°
Hose fitted: PA 25.0×29.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
K1 plastic quick connectors CQC20-ID25-0° for CQC Cooling Water adaptor
Item：K1 plastic quick connectors CQC20-ID25-0° for CQC Cooling Water adaptor
Media: CQC Cooling Water
Buttons: 2
Size: CQC20-ID25-0°
Hose fitted: PA 25.0×29.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
V38W plastic quick connectors NW40-ID40-0° for VDA Cooling Water VDA QC
Item：V38W plastic quick connectors NW40-ID40-0° for VDA Cooling Water VDA QC
Media: VDA Cooling Water
Buttons: 2
Size: NW40-ID40-0°
Hose fitted: NW40 to PA 40.0×45.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
V37W plastic quick connectors NW40-ID40-90° for VDA Cooling Water VDA QC
Item：V37W plastic quick connectors NW40-ID40-90° for VDA Cooling Water VDA QC
Media: VDA Cooling Water
Buttons: 2
Size: NW40-ID40-90°
Hose fitted: PA 40.0×45.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
V36W plastic quick connectors NW40-ID40-0° for VDA Cooling Water VDA QC
Item：V36W plastic quick connectors NW40-ID40-0° for VDA Cooling Water VDA QC
Media: VDA Cooling Water
Buttons: 2
Size: NW40-ID40-0°
Hose fitted: PA 40.0×45.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
V33W plastic quick connectors NW26-ID26-0° for VDA Cooling Water VDA QC
Item： V33W plastic quick connectors NW26-ID26-0° for VDA Cooling Water VDA QC
Media: VDA Cooling Water
Buttons: 2
Size: NW26-ID26-0°
Hose fitted: PA 26.0×30.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
V32W plastic quick connectors NW26-ID26-90° for VDA Cooling Water VDA QC
Item： V32W plastic quick connectors NW26-ID26-90° for VDA Cooling Water VDA QC
Media: VDA Cooling Water
Buttons: 2
Size: NW26-ID26-90°
Hose fitted: PA 26.0×30.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
V23W plastic quick connectors Reducing T Shape Tee ID25-CQC20-NW26 for VDA Cooling Water
Item： V23W plastic quick connectors ID25-CQC20-NW26 for VDA Cooling Water
Media: VDA Cooling Water
Buttons: 2
Size: NW26-ID25-0°
Hose fitted: PA 25.0×29.0 /CQC20/NW26
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
V21W plastic quick connectors NW26-ID26-0° for VDA Cooling Water
Item： V21W plastic quick connectors NW26-ID26-0° for VDA Cooling Water
Media: VDA Cooling Water
Buttons: 2
Size: NW26-ID26-0°
Hose fitted: Rubber Hose ID26～ID30.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
V20W plastic quick connectors NW26-ID25-90° for VDA Cooling Water
Item： V20W plastic quick connectors NW26-ID25-90° for VDA Cooling Water
Media: VDA Cooling Water
Buttons: 2
Size: NW26-ID25-90°
Hose fitted: PA 25.0×29.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
